|  Últimas noticias: 

~ English new ~

Kodak’s continuous investment in manufacturing excellence enables printers around the world to achieve growth


When Kodak launched the SONORA X Process Free Plate in 2018, it marked a breakthrough for this technology. It enabled the market fit for process free to expand to up to 80% of printers, making SONORA X genuinely mainstream. The pathway to this moment was guided by several factors that have made Kodak’s long track record of launching innovative, game-changing new printing solutions possible; Kodak’s deep commitment to science, robust investment in research and development and world-class manufacturing capabilities spanning North America, Asia and Europe.

“On the R&D side, Kodak today empowers some of the most eminent scientists in our industry to explore new scientific avenues as exemplified by our approximately 4,000 current patents,” said John O’Grady, President, Print Systems Division and Senior Vice President, Eastman Kodak Company. “Kodak’s labs have been leaders in evolving commercial printing and materials. We were a pioneer in developing the print methodologies of the 20th century—and now, we’re leading in identifying ways to turn printing techniques into additive manufacturing tools.”

Kodak’s continuous investment in manufacturing excellence enables printers around the world to achieve growth

The development of SONORA was born out of a clear mandate that guides our research. Beginning at the initial design phase, we take efficiency into account, functionally using only the materials that will do what’s required for the product, with no waste, trimming or extra finishing. In SONORA’s case, the result of that design philosophy is plates that pack in a ton of innovation. Turning innovation into reality is where Kodak’s legacy of manufacturing excellence makes all the difference. While some companies have been scaling back their operations, Kodak continues to invest in its manufacturing capabilities to the tune of $80M over the past 10 years. For example, Kodak has been making plates in Columbus since 1991. Since then the Columbus site has undergone several improvements to increase production quality and capacity, and it currently has state-of-the-art equipment, advanced technology, and over 200 experienced and talented employees. Starting in 2009, Kodak completed a $15 million expansion that added 26,000 square feet to the existing facility and added a third plate production line. In 2016 a $16 million expansion added 48,000 square feet and a manufacturing line dedicated to the production of SONORA Process Free Plates. Moreover, in 2017, we installed new auto-wrapper equipment to optimize efficiency and process control.

In addition to our Columbus facility, Kodak operates three other plate manufacturing sites strategically located around the globe, including facilities in Osterode, Germany; Xiamen, China, and Gunma, Japan. With continued investments in these manufacturing facilities, we’re able to bring the quality of Kodak products to printers anywhere in the world, when they need it, and as quickly as possible. In Asia, Kodak upgraded its Xiamen, China, plant to produce SONORA Plates adding a line capable of high-speed production, which not only increased capacity to meet the demand for SONORA Plates but improves the efficiency across Kodak’s entire plate portfolio. And in each facility, strict compliance with environmental, quality and occupational safety standards, as well as continuous improvements in these areas, is a central element of the Kodak philosophy. For example, in 2018, our Osterode facility was recertified for its ISO 9001, 14001 and 18001 management systems, which covers environmental and occupational safety management. In addition, the facility was certified to the ISO 50001 for energy savings management.

“The excellence achieved in Osterode is taking place across all of our manufacturing sites as part of our sustained drive to further optimize our processes and our resource efficiency with innovative approaches that help raise customer satisfaction,” said Sven Freyer, WW Director Plate & Chemical Operation VP Print Systems Division, Kodak.

When a pallet load of plates, whether process free or processed, arrives at a customer site from one of these four facilities it completes a journey that fuses Kodak’s R&D prowess, manufacturing excellence, and commitment to customer service. The journey unfurls as a massive coil of high-grade aluminum is loaded onto an unwinder, starting an increasingly high-speed automated process that moves through six major production steps. The continuous aluminum coil moves through an electrochemical graining bath, an anodization process, then a coating is applied to the grained and anodized substrate and dried. Next, a high-resolution surface inspection system provides a quality control check before the coils are cut into individual plates which are wrapped and boxed for delivery, much of which is automated. It’s a rigorous process that translates into best in class quality for the plates Kodak manufactures.

Kodak’s investments in manufacturing excellence means more efficient processes that help keep costs down, decreases environmental impact, while maintaining high quality products for customers. This is the reason why we are constantly looking at new ways to deliver on this commitment, from evaluating new packaging prototypes that will reduce the amount of waste for customers to streamlining our product portfolio. By 2022, Kodak anticipates that nearly 80% of our plate production will come from SONORA and expects nearly 1 out 3 plates it sells to be process-free by the end of 2019. To meet the demand generated by the tremendous growth of SONORA, Kodak will continue to invest in building the capacity and capabilities of our manufacturing operations around the world - for today, tomorrow and beyond.

Artículos relacionados

La nueva oportunidad digital de Kodak
Todos los ojos puestos en un futuro flexo
La nueva alianza certificada entre Kodak y Dataline Solutions pone de relieve la integración automatizada del sistema MIS MultiPress con el flujo de trabajo KODAK Prinergy
Kodak anuncia innovaciones revolucionarias en toda su cartera digital y de offset
Kodak announces efficient connectivity between KODAK PRINERGY Workflow 8.4 and Canon’s PRISMAsync Print Server v7.2
Kodak y UTeco comercializan el primer sistema de impresión de packaging flexible con tecnología Ultrastream
Las innovaciones de la impresión por inyección de tinta impulsan un mercado de cuidado personal en auge
KODAK PRINERGY VME with Managed Services, precursor de una nueva era en los flujos de trabajo
La Conferencia europea de la GUA conmemora el XX aniversario del flujo de trabajo KODAK PRINERGY
Stephen Miller, Director de Gestión de productos de la división de Software Kodak de Eastman Kodak Company

~ Revista ~

Impremprés - 435
Julio / Agosto 2020

~ Destacado ~

Suscripción boletin

Suscripción revista

~ Publicidad ~






© 2001-2020 Ediciones Industria Gráfica - Todos los derechos reservados
Aviso legal | Política de privacidad